Part Number Hot Search : 
53120 P202K UPG2009 AK8855 UF30M T04CO 1212S NSC5136D
Product Description
Full Text Search
 

To Download IT3011 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 IT3011 12.5 Gb/s High-Sensitivity Limiter Amplifier
Description
The IT3011 is a limiting amplifier for use as a post amplifier in OC-192 and STM-64 optical receivers. Signals as small as +/-7 mVpp differential can be amplified to 1.28 Vpp differential. Offset correction and output voltage control are provided. Both AC and DC coupling are allowed at the input and output. The high sensitivity allows the device to be used at the output of a transimpedance amplifier. 3-dB bandwidth: 10 GHz Differential gain: 42 dB Saturated output: 640 mVpp on each output into 50 ohms Input sensitivity 2.5 mVpp at BER<1E-12 Single bias supply: -5.2 V Power consumption: 494 mW Bias current: 95 mA DC offset correction Amplitude Voltage Control Low RMS jitter Low-cost JEDEC QFP-N (MO-220) package
Features
www..com
Absolute Maximum Ratings
S ymbol
Vee1,2 Vd Vm T ch T stg
Parameters/conditions
Power supply voltage Applied voltage at data input (differential) Applied voltage at data input (single ended) Maximum channel temperature Storage temperature
Min.
-8
Max.
0 3 1.5 5 150
Units
V V V mA
o
Ioffset(+),(-) Offset control current -65
C
150
C
Recommended Operating Conditions
Symbol
Tc Vee1 Vee2 Iee1+Iee2 Voffset (+) Voffset (-) Vctrl Vd Vm Vindc
Parameters/conditions
Operating temperature range (T case) Power supply voltage Power supply voltage T otal bias supply current Offset control voltage Offset control voltage Amplitude voltage control Applied peak to peak voltage at data input (differential) Applied peak to peak voltage at data input (single ended) Input/output interface DC input voltage (with DC-coupled input)
Min.
0 -5.45 -5.45 80 -5 -5 -5.2 7 14
Typ.
-5.2 -5.2 95
Max.
85 -4.95 -4.95 110 5 5 0 1000 1000
Units
o
C
V V mA V V V mV mV V
AC and DC coupled -0.5 0.5
www.iterrac.com
This is a Production data sheet. See "Product Status Definitions" on Web site or catalog for product development status.
August 17, 2005 Doc. 1167 Rev9
1
iTerra Communications 2400 Geng Road, Ste. 100, Palo Alto, CA 94303 Phone (650) 424-1937, Fax (650) 424-1938
IT3011 12.5 Gb/s High-Sensitivity Limiter Amplifier
Electrical Characteristics
At ambient Temperature Vee1,2=-5.2 V
Symbol P G B3dB RLin RLout Vin Parameters/conditions Pow er consumption Differential small signal gain 3 dB bandw idth Input return loss (up to 10 GHz) Output return loss (up to 10 GHz) Input sensitivity diff. input (BER<1E-12, 223-1PRBS, 12.5Gb/s) Output peak to peak voltage (either Q or /Q) (Vctrl=0V for max. output voltage) Vout sensitivity vs. bias (Vee=-5.2 V +/-5%) Output DC voltage (DC coupled to 50 ohm load) Rise time (20% - 80%) Fall time (20% - 80%) Jitter peak to peak -450 -350 21 17 9 Min. 416 41 9 12 10 +/-2.5 590 640 +/-11 -250 27 23 14 Typ. 494 42 10 20 15 Max. 572 Units mW dB GHz dB dB mVpp mVpp % mV ps ps ps
www..com
Vout Vout Voutdc Trse Tfse Jpp
S-Parameter Data
(Measured on connectorized Evaluation board)
IT3011 Single Ended Gain
48 44 40 36 32 28 24 20 16 12 8 4 0 0 2 4 6 8 10 12 14 16 18
0 -5 -10 -15
IT3011 Input Return Loss
Vee1=Vee2=-5.2 V Iee1+Iee2=95 mA
S21 (dB)
S11 (dB)
-20 -25 -30 -35 -40 -45 -50
0
2
4
6
8
10
12
14
16
18
Freq. (GHz)
Freq. (GHz)
IT3011 Output Return Loss
0 -5 -10 -15
0 -10 -20 -30
IT3011 Isolation
S22 (dB)
-20 -25 -30 -35 -40 -45 -50 0 2 4 6 8 10 12 14 16 18
S12 (dB)
-40 -50 -60 -70 -80 -90 -100 0 2 4 6 8 10 12 14 16 18
Freq. (GHz)
Freq. (GHz)
www.iterrac.com
This is a Production data sheet. See "Product Status Definitions" on Web site or catalog for product development status.
August 17, 2005 Doc. 1167 Rev9
2
iTerra Communications 2400 Geng Road, Ste. 100, Palo Alto, CA 94303 Phone (650) 424-1937, Fax (650) 424-1938
IT3011 12.5 Gb/s High-Sensitivity Limiter Amplifier
Eye Diagram Performance
Vee1=Vee2=-5.2 V Iee1+Iee2=95 mA
www..com
Bit rate: 10.7 Gb/s Vin =+/-6 mVpp, Vout = +/-610 mVpp
Bit rate: 12.5 Gb/s Vin =+/-6 mVpp, Vout = +/-603 mVpp
Bit rate: 10.7 Gb/s Vin =+/-8 mVpp, Vout = +/-640 mVpp
Bit rate: 12.5 Gb/s Vin =+/-8 mVpp, Vout = +/-638 mVpp
Bit rate: 10.7 Gb/s Vin =+/-200 mVpp, Vout = +/-644 mVpp
Bit rate: 12.5 Gb/s Vin =+/-200 mVpp, Vout = +/-644 mVpp
www.iterrac.com
This is a Production data sheet. See "Product Status Definitions" on Web site or catalog for product development status.
August 17, 2005 Doc. 1167 Rev9
3
iTerra Communications 2400 Geng Road, Ste. 100, Palo Alto, CA 94303 Phone (650) 424-1937, Fax (650) 424-1938
IT3011 12.5 Gb/s High-Sensitivity Limiter Amplifier
Eye Diagram Performance
(cont.)
www..com
Bit rate: 10.7 Gb/s Vin =+/-200 mVpp, Vout = +/-653 mVpp
Bit rate: 12.5 Gb/s Vin = +/-200 mVpp, Vout = +/-653 mVpp
Bit rate: 10.7 Gb/s Vin =+/-1 mVpp, Vout = +/-653 mVpp
Bit rate: 12.5 Gb/s Vin =+/-1 mVpp, Vout = +/-653 mVpp
Input Sensitivity
Vee1=Vee2=-5.2V Iee1+Iee2=95mA
Input sensitivity = +/-2.5 mVpp differential input, 12.5 Gb/s BER = <1E-12 Output voltage = 367 mVpp single-ended
www.iterrac.com
This is a Production data sheet. See "Product Status Definitions" on Web site or catalog for product development status.
August 17, 2005 Doc. 1167 Rev9
4
iTerra Communications 2400 Geng Road, Ste. 100, Palo Alto, CA 94303 Phone (650) 424-1937, Fax (650) 424-1938
IT3011 12.5 Gb/s High-Sensitivity Limiter Amplifier
Performance As Function of Input Voltage
Output Voltage (+/-mV)
Input/Output Characteristic
700
Output Voltage (+/-mV) 700 650 600 550 500 450 400 350 300 1
Input/Output Characteristic
650 600 550 500 450 400 350 300 0 2 4 6 8 10 12 14 16 18 20 Input (+/-mV)
www..com
10 100 Input (+/-mV)
1000
Input/Output DC Characteristics
0 -100
Peak to Peak Jitter vs. Input
30 27 24 Jitter (pp-psec) 21 18 15 12 9 6 3
10.7 Gbps 12.5 Gbps
DC Output (mV)
-200 -300 -400 -500 -600 -700 -800
-280 -240 -200 -160 -120 -80 -40 0 40 80 120 160 200 240 280
0 1 10 100 Input Amplitude (mV pp) 1000
DC Input Offset (*) (mV)
Rise Time vs Input Voltage @ 12.5 Gb/s
40 35
Fall Time vs Input Voltage @ 12.5 Gb/s
35 30 Rise Time (psec) Fall Tim e 25 20 15 10 5 0 1 10 100 1000
Rise Time (psec)
30 25 20 15 10 5 0 1 10 100 1000
Input Amplitude (+/-mVpp)
Input Amplitude (+/-mVpp)
(*) Input applied to the offset control pin (Voffset1) and open output.
This is a Production data sheet. See "Product Status Definitions" on Web site or catalog for product development status.
www.iterrac.com
August 17, 2005 Doc. 1167 Rev9
5
iTerra Communications 2400 Geng Road, Ste. 100, Palo Alto, CA 94303 Phone (650) 424-1937, Fax (650) 424-1938
IT3011 12.5 Gb/s High-Sensitivity Limiter Amplifier
Output Voltage Control
700 600 Eye Amplitude (mV) 500
Eye Amplitude vs Vctrl
100 95 90
Power Supply Current
Current (mA)
-5 -4.5 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0
400 300 200 100 0 -100 -5.5
85 80 75 70 65 60 -6 -5 -4 -3 -2 -1 0
www..com
Control Voltage Vtrl (Volts)
Control Voltage (Volts)
Bit rate: 12.5 Gb/s, Vctrl =-1.7 V Vin =+/-200 mVpp, Vou t =+/-353 mVpp
Bit rate: 12.5 Gb/s, Vctrl =-2.7 V Vin =+/-200 mVpp, Vout =+/-137mVpp
www.iterrac.com
This is a Production data sheet. See "Product Status Definitions" on Web site or catalog for product development status.
August 17, 2005 Doc. 1167 Rev9
6
iTerra Communications 2400 Geng Road, Ste. 100, Palo Alto, CA 94303 Phone (650) 424-1937, Fax (650) 424-1938
IT3011 12.5 Gb/s High-Sensitivity Limiter Amplifier
Recommended Operational Setup
Apply -5.2 V at Vee1 and Vee2 Apply 0 V at Vctrl for maximum output
Vctrl
560pF 560pF
0.1F
1F
www..com
DC blocking capacitors optional
Voffset (+)
0.1F
VL1
Din
VL2
Q
RF input
/Din
IT3011
/Q
RF output
Voffset (-)
0.1F
Vee1 Vcb
Vee2
Vee= -5.2 V
560pF
0.1F
Vee= -5.2V
0.1F
560pF
0.1F
www.iterrac.com
This is a Production data sheet. See "Product Status Definitions" on Web site or catalog for product development status.
August 17, 2005 Doc. 1167 Rev9
7
iTerra Communications 2400 Geng Road, Ste. 100, Palo Alto, CA 94303 Phone (650) 424-1937, Fax (650) 424-1938
IT3011 12.5 Gb/s High-Sensitivity Limiter Amplifier
Package Drawings, Pinouts
www..com
Pinouts:
P1: GND P2: Din (RF input) P3: /Din (/RF input) P4: GND P5: Voffset (-) P6: Vee1 P7: Vcb P8: Vee2 P9: GND P10: /Q (/RF Out) P11: Q (RF Out) P12: GND P13: VL1 P14: Vctrl (voltage control) P15: VL2 P16: Voffset (+)
www.iterrac.com
This is a Production data sheet. See "Product Status Definitions" on Web site or catalog for product development status.
August 17, 2005 Doc. 1167 Rev9
8
iTerra Communications 2400 Geng Road, Ste. 100, Palo Alto, CA 94303 Phone (650) 424-1937, Fax (650) 424-1938


▲Up To Search▲   

 
Price & Availability of IT3011

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X